2022 Good Quality Lenovo Sfp+ Sr Transceiver - 100M fiber optic transceiver (one optical and two electrical) – Changfei Optoelectronics
2022 Good Quality Lenovo Sfp+ Sr Transceiver - 100M fiber optic transceiver (one optical and two electrical) – Changfei Optoelectronics Detail:
product description:
This product is a 100M fiber transceiver with 1 100M optical port and 2 100Base-T(X) adaptive Ethernet RJ45 ports. It can help users realize the functions of Ethernet data exchange, aggregation and long-distance optical transmission. The device adopts fanless and low power consumption design, which has the advantages of convenient use, small size and simple maintenance. The product design conforms to the Ethernet standard, and the performance is stable and reliable. The equipment can be widely used in various broadband data transmission fields such as intelligent transportation, telecommunications, security, financial securities, customs, shipping, electric power, water conservancy and oil fields.
model | CF-1022SW-20 |
network port | 2×10/100Base-T Ethernet ports |
Fiber port | 1×100Base-FX SC interface |
Power interface | DC |
led | PWR, FDX, FX, TP, SD/SPD1, SPD2 |
rate | 100M |
light wavelength | TX1310/RX1550nm |
web standard | IEEE802.3, IEEE802.3u, IEEE802.3z |
Transmission distance | 20KM |
transfer mode | full duplex/half duplex |
IP rating | IP30 |
Backplane bandwidth | 600Mbps |
packet forwarding rate | 447Kpps |
Input voltage | DC 5V |
Power consumption | Full load<5W |
Operating temperature | -20℃ ~ +70℃ |
storage temperature | -15℃ ~ +35℃ |
Working humidity | 5%-95% (no condensation) |
Cooling method | fanless |
Dimensions (LxDxH) | 94mm×71mm×26mm |
weight | 200g |
Installation method | Desktop/Wall Mount |
Certification | CE, FCC, ROHS |
How to install fiber optic video surveillance?
How to install optical fiber video surveillance? In the video surveillance system, the use of optical fiber transmission is generally far away, and the distance of more than 100m can be used for optical fiber transmission. The optical fiber transmission has the following features: wide frequency band, low attenuation, strong anti-interference, transmission It has the characteristics of high confidentiality, and briefly introduces how to use optical fiber to transmit video surveillance.
1. How does optical fiber transmit video signals?
In the long-distance video surveillance transmission process, the optical fiber transmission method is generally used. The optical fiber transmits signals in the form of optical pulses. Use the network cable to transmit to the terminal receiving device. The material of optical fiber is mainly glass or plexiglass, which is composed of fiber core, cladding and protective sheath. Optical fiber can generally be divided into single-mode fiber and multi-mode fiber. Single-mode optical fiber transceiver: the transmission distance is 20-120 kilometers; multi-mode optical fiber transceiver: the transmission distance is 2-5 kilometers. In the monitoring and installation process, single-mode optical fiber transceivers are mostly used, with long transmission distance, stable effect, and wiring. Convenience.
2. Introduction of optical fiber transceiver transmission
Optical fiber transceivers generally only transmit 802.3 standard network signals. The main chip is a network switch chip. The receiving and sending ends need to be paired to use A and B. They can also be used with switch optical ports, matching standards. The models at both ends are -T and -R, same port rate, same suffix (-A/-B)
When the transceiver is used,
Different indicators of transceivers represent different meanings. Taking common 100M single-mode transceivers as an example, TX and FX represent the optical port mode. If they are always on, it means that the network is working in 100M mode. If it is off, it means the network is working at 10M. Mode, link is the pigtail transmission indicator, normally on means the connection is normal, if it flashes, it means that the data is being transmitted normally, act means the network cable indicator, when it is normally on, it means the network is connected, when it flashes, the network cable data transmission is normal, FDX means the electrical port half-duplex, In full duplex mode, PWR is the power indicator.
Product detail pictures:
Related Product Guide:
Each individual member from our large performance revenue crew values customers' needs and company communication for 2022 Good Quality Lenovo Sfp+ Sr Transceiver - 100M fiber optic transceiver (one optical and two electrical) – Changfei Optoelectronics , The product will supply to all over the world, such as: Angola, San Diego, Ghana, Aiming to grow to be by far the most professional supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal goods. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. Detailed data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're going to allow you to get complete acknowledge about our items and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.
By Patricia from Tajikistan - 2018.10.09 19:07
This is a very professional wholesaler, we always come to their company for procurement, good quality and cheap.
By Joa from Japan - 2017.11.01 17:04